Bathroom radiator Sahara exchange 600 x 1600 mm white straight + 65 cm
- High quality bathroom radiator
- Mounting material included
- Quality from ECD Germany
- Classic design
- Top processing
- Versatile
- 3 years warranty
Scope of delivery:
1 x bath radiator
air bleed valve 1/2 inch
Blanking plug 1/2 inch
Assembly instructions
Wall mounting set:
- 4 x wall bracket
- 4 x screws and dowels
- 4 x holder screw
- 4 x discs
1 x bath radiator
air bleed valve 1/2 inch
Blanking plug 1/2 inch
Assembly instructions
Wall mounting set:
- 4 x wall bracket
- 4 x screws and dowels
- 4 x holder screw
- 4 x discs
Technical information:
width (mm): 600
height (mm): 1600
Hub distance (mm): 650
Pipe diameter: Ø22,5
Profile: 40*30*1,5 D
Heat output (watts at 75/65/20°): 813
Number of tubes (L): 27
Weight (Kg): 8,82
Colour: white
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Vertical D-sections 40 x 30 x 1.5 mm
Horizontal round tubes 22.5 x 1.2 mm
distance to the wall: approx. 6,5cm
High-quality bathroom radiator from the specialist dealer
Long life thanks to 2-coat paint
The lower side connection is approx. 4 cm away from the lower edge
The radiator can be connected by turning it to the right or left
Radiators blasted with recyclable material, degreased, iron-phosphated and electrostatically coated with epoxy-polyester in white
The radiator was specially designed to replace steel and tube radiators and heating plates
It can be installed in the bathroom and kitchen directly to the existing connections quickly, easily and without structural changes
Thick base material
Immediately available from stock
Robust cardboard packaging
width (mm): 600
height (mm): 1600
Hub distance (mm): 650
Pipe diameter: Ø22,5
Profile: 40*30*1,5 D
Heat output (watts at 75/65/20°): 813
Number of tubes (L): 27
Weight (Kg): 8,82
Colour: white
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Vertical D-sections 40 x 30 x 1.5 mm
Horizontal round tubes 22.5 x 1.2 mm
distance to the wall: approx. 6,5cm
High-quality bathroom radiator from the specialist dealer
Long life thanks to 2-coat paint
The lower side connection is approx. 4 cm away from the lower edge
The radiator can be connected by turning it to the right or left
Radiators blasted with recyclable material, degreased, iron-phosphated and electrostatically coated with epoxy-polyester in white
The radiator was specially designed to replace steel and tube radiators and heating plates
It can be installed in the bathroom and kitchen directly to the existing connections quickly, easily and without structural changes
Thick base material
Immediately available from stock
Robust cardboard packaging
Technische Informationen
- Maximaler Betriebsdruck: 10 bar (1 MPa)
- Prüfdruck: 12 bar (1,2 MPa)
- Vertikale D-Profile 40 x 30 x 1,5 mm
- Horizontale Rundrohre 22,5 x 1,2 mm
- Abstand zur Wand: ca. 6,5cm
- Hochwertiger Badheizkörper vom Fachhändler
- Lange Lebensdauer dank 2-Schicht-Lackierung
- Der untere Seiten-Anschluss ist ca. 4 cm von der Unterkante weg
- Der Heizkörper kann durch drehen rechts oder links angeschlossen werden
- Heizkörper mit recycelbarem Material gestrahlt, entfettet, eisenphosphatiert und elektrostatisch mit Epoxid-Polyester beschichtet in weiß - RAL 9016 / Anthrazit.
- Der Heizkörper wurde speziell als Ersatz für Stahl- und Röhrenradiatoren und für Heizplatten konzipiert
- Er kann in Bad und Küche direkt an die vorhandenen Anschlüsse schnell, einfach und ohne bauliche Veränderungen montiert werden
- Dickes Grundmaterial
- Sofort ab Lager lieferbar
- Robuste Kartonverpackung
Befestigungsset für Badheizkörper:
Real ratings
